EKF - Short Profile
EKF - Short Profile
SE5-CLUB

CompactPCI® Serial Peripheral Board

U.2 NVMe® SSD Carrier



SE5-CLUB

Description

Ordering Information

Product Information

Block Diagram

General Information
Products One Click

All You Need to Know



Photo Gallery


© EKF • Images show up in a secondary browser tab or window


SE5-CLUB

U.2 NVMe® SSD Carrier Board


The SE5-CLUB is a peripheral card for CompactPCI® Serial systems, for use as a mass storage solution by means of an U.2 type NVMe® SSD, available with up to 30TB capacity as of current. The board is equipped with an SFF-8639 receptacle, which can accommodate a PCIe® Gen4 based 2.5-inch U.2 or U.3 drive up to 15mm height.

The SE5-CLUB fits into any peripheral slot which is PCI Express® enabled. For best performance a PCIe® x4 backplane slot is recommended (e.g. fat pipe slot). As an option, the SE5-CLUB can be equipped in addition with an M.2 SATA SSD, and/or USB3 Type-A and RJ45 2.5GBASE-T front panel connectors.


SE5-CLUB - Photo soon here

Feature Summary

  General
  • Peripheral board for PICMG® CompactPCI® Serial (CPCI-S.0) systems
  • Form factor single size Eurocard (board dimensions 100x160mm2)
  • Mounting height 3U
  • Front panel width 4HP
  • Backplane communication via PCI Express® x4 or x1 enabled slot (J1/P1 connector)

  U.2 Storage
  • SFF-8639 Receptacle
  • Mounting holes for 2.5-inch U.2 NVMe® drive (SSD not included w/o explicitly ordered)
  • Maximum U.2 height 15mm
  • Suitable also for U.3 type SSD w/o user intervention
  • 12V Main power, 3.3V auxiliary power
  • PCI Express® Gen4 x 4
  • PCIe® Gen4 Redrivers on-board for optimum signal integrity
  • Theoretical transfer speed up to 64Gbps (with PCIe® Gen4 enabled CPU card & backplane x4 slot only)
  • Typical transfer speed up to 32Gbps (with PCIe® Gen3 enabled CPU card & backplane x4 slot only)
  • Board Hot-Plug procedure supported

  Option M.2 SATA Storage
  • Option M.2 B-Key socket
  • Up to 2280 size module style
  • Suitable for an SATA 6G module (not suitable for PCIe® NVMe®)
  • Requires an SATA enabled J1/P1 backplane slot
  • M.2 SATA SSD not included w/o explicitly ordered

  Option Front Panel I/O
  • Option RJ45 Ethernet front panel jack w. integrated transformer magnetics
  • 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T compliant data transfer rate (NBASE-T 2.5GE)
  • Requires a Gigabit Ethernet enabled backplane slot (J6/P6)
  • 2.5GBASE-T with a 2.5G capable CPU card only
  • Option Type-A USB3 receptacle
  • Requires an USB enabled backplane slot (at least USB 2.0 via J1/P1)
  • Up to 10G USB 3.1 Gen2 transfer speed (10G with a suitable CPU card only)

  Applications
  • Rugged mass storage for demanding industrial computing, edge computing, IIoT
  • Enterprise and data center performance and reliability for industrial use conditions
  • Scalable solution - up to 30TB capacity per drive, up to 8 carrier cards in a CompactPCI® Serial system

  Regulatory & Environmental
  • Designed & manufactured in Germany
  • ISO 9001 certified quality management
  • Custom specific development on request
  • Long term availability
  • Coating, sealing, underfilling on request
  • RoHS compliant
  • Operating temperature carrier board components -40°C to +85°C (industrial temperature range)
  • Storage temperature: -40°C to +85°C, max. gradient 5°C/min
  • Actual operating temperature range depends on particular U.2 and M.2 SSD in use - please refer to manufacturer datasheets
  • Humidity 5% ... 95% RH non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
  • EC Regulatory EN55035, EN55032, EN62368-1 (CE)
  • MTBF tbd years (MIL-HDBK-217F, SN29500 @+40°C)

SE5-CLUB • Simplified Block Diagram

SE5-CLUB • Simplified Block Diagram
Ordering Information
Please refer to List 21 for popular SKUs